Cole-Parmer WS-200-4 Stuart Water Still 240 VAC

Cole-Parmer WS-200-4 Stuart Water Still 240 VAC

B8A90839

Product code: B8A90839

Direct Delivery – up to 7 days.
-
+

The Distinction D4000 is a simple glass water still with a silica sheathed heating element which ensures top purity distillate at an economical price.

  • Designed to give a reliable performance and has an output of 4 litres per hour of high quality distilled water.
  • The unique condenser design ensures that the droplets of distilled water remain in contact with the cooling coil for the longest possible time producing cold distilled water and pre-heating the boiler feed to increase efficiency.
  • The Distinction is supplied complete with a 'reservoir level control' which fits into the distillate collecting vessel and will turn off the heating element when the vessel is full. Prevents overflow if the still is inadvertently left switched on when unattended. With two independent safety thermostats to prevent over heating in the event of an interruption to the water supply.
  • A built in PTFE drain stopcock and acid funnel allow easy cleaning without dismantling the glassware which protect the still from overheating in the event of cooling water supply failure, or loss of water from the boiler.
  • The condenser is fitted with screw thread connections for safe and simple hose fitting and removal without risk of breakage.
  • The still can be wall or bench mounted. The stand is pre-drilled to facilitate wall mounting.
  • The Distinction complies fully with IEC1010-1/ENG1010-1:1993 and carries the CE mark.

Specification:

  • Output: 4 litres per hour
  • Water supply: Minimum flowrate 1 litre per min, Min pressure 0.2 x 105 Nm-2 (3 psi)
  • Distillate quality: Pyrogen free, Conductivity 1.0-2.0µScm-1,
  • Temperature of water: 25-35°C
  • Element power: 3kW, silica sheathed
  • Electrical supply: 220-240V, 50-60Hz Single phase
  • Dimensions: 540 x 160 x 410mm, width x depth x height
  • Mass: 6.5kg

Further Information

Automatic System
Will turn off the heating element when the vessel is full
Brand
Cole-Parmer
Conductivity, µScm-1
1.0 - 2.0
Dimensions (w x d x h)
540 x 160 x 410mm
Output
4 litres per hour
Output Flow Rate
4L per hour
pH
5.0 - 6.5
Power requirement
3kW
Resistivity, mOhm-cm
0.5 - 1.0
Safety
Reservoir full shut off
Temperature
25 - 35°C
Versatile
Wall mountable
Water supply
1 litre/min
3 - 100psi
(20-700kPa)

Documents

-
+
Direct Delivery – up to 7 days.

The Distinction D4000 is a simple glass water still with a silica sheathed heating element which ensures top purity distillate at an economical price.

  • Designed to give a reliable performance and has an output of 4 litres per hour of high quality distilled water.
  • The unique condenser design ensures that the droplets of distilled water remain in contact with the cooling coil for the longest possible time producing cold distilled water and pre-heating the boiler feed to increase efficiency.
  • The Distinction is supplied complete with a 'reservoir level control' which fits into the distillate collecting vessel and will turn off the heating element when the vessel is full. Prevents overflow if the still is inadvertently left switched on when unattended. With two independent safety thermostats to prevent over heating in the event of an interruption to the water supply.
  • A built in PTFE drain stopcock and acid funnel allow easy cleaning without dismantling the glassware which protect the still from overheating in the event of cooling water supply failure, or loss of water from the boiler.
  • The condenser is fitted with screw thread connections for safe and simple hose fitting and removal without risk of breakage.
  • The still can be wall or bench mounted. The stand is pre-drilled to facilitate wall mounting.
  • The Distinction complies fully with IEC1010-1/ENG1010-1:1993 and carries the CE mark.

Specification:

  • Output: 4 litres per hour
  • Water supply: Minimum flowrate 1 litre per min, Min pressure 0.2 x 105 Nm-2 (3 psi)
  • Distillate quality: Pyrogen free, Conductivity 1.0-2.0µScm-1,
  • Temperature of water: 25-35°C
  • Element power: 3kW, silica sheathed
  • Electrical supply: 220-240V, 50-60Hz Single phase
  • Dimensions: 540 x 160 x 410mm, width x depth x height
  • Mass: 6.5kg

Further Information

Automatic System
Will turn off the heating element when the vessel is full
Brand
Cole-Parmer
Conductivity, µScm-1
1.0 - 2.0
Dimensions (w x d x h)
540 x 160 x 410mm
Output
4 litres per hour
Output Flow Rate
4L per hour
pH
5.0 - 6.5
Power requirement
3kW
Resistivity, mOhm-cm
0.5 - 1.0
Safety
Reservoir full shut off
Temperature
25 - 35°C
Versatile
Wall mountable
Water supply
1 litre/min
3 - 100psi
(20-700kPa)

Documents

You May Also Like

Shopping from Overseas?

We have detected that your IP address is not UK based.

We have a specific international website which deals with all non-UK transactions and deliveries. Please select which website you would like to continue with.

For International Delivery

Findel Education family logos Switch to Findel International

For Delivery in the UK

Brand logo